Omega RD-MV100 Series, User Manual

Page: 177 / 299

8-18
8.8 Setting the Auto Save Interval for the Display
Data
When the method to save the data residing in the memory to the external storage
medium is [auto save], you set the auto save interval.
• The auto save interval is used in saving the display data.
• The display data residing in the internal memory is automatically saved to the external
storage medium as a single file at each auto save interval.
Procedure
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed).
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
To display the setting screen press the soft key
#3
.
1
1. Auto save interval
Displayed when [auto save] is selected. See section 8.8.
Select from the choices shown on the soft keys.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.