Omega RD-MV100 Series, User Manual

Page: 220 / 299

10-20
10.12 Using the Daylight Savings Time Adjustment
Function
• When the specified time is reached at which the daylight savings time adjustment is to
be enabled (the time set at [Summer]), the recorder automatically sets the clock
ahead by one hour.
(Example : If the time is set to 9 O’clock on June 1, the time is set ahead to 10 O’clock
June 1.)
• When the specified time is reached at which the daylight savings time adjustment is to
be disabled (the time set at [Winter]), the recorder automatically sets the clock back
by one hour.
(Example : If the time is set to 9 O’clock on December 1, the time is set back to 8
O’clock December 1.)
• The daylight savings time adjustment function is set using year, month, day, and time.
Set the time for every year.
• The year is specified using the lower two digits. 00 to 79 represent year 2000 to
2079. 80 to 99 represent 1980 to 1999.
Procedure
Setting the time at which the daylight savings time adjustment is to be enabled/
disabled
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed.)
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press the soft key
Next 1/3
.
To display the setting screen press the soft key
#6
.
1 2
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. On/Off
Select whether or not to use the daylight savings time adjustment function. If [On] is
selected, a box used to enter the year, month, and day appears. If this parameter is
set to [On] and the summer/winter time is set, this parameter turns [Off] automatically
when the set time is elapsed.
2. Summer/Winter
Set the time at which the daylight savings time adjustment is to be enabled/disabled.
Pressing the [Input] soft key displays a window used to enter the year, month, day,
and time. Enter the values and press the DISP/ENTER key. For the procedures
related to entering numerical values, see “Entering Numbers” on page 3-21.