Omega RD-MV100 Series, User Manual

Page: 151 / 299

7-17
Setting and Operating the Display
7
Explanation
Scale Specifications
Scale display position
On the trend display, the scale display position for the channels that are assigned to
groups can be displayed in 6 different positions. (See the figure below.)
• During trend vertical display
The scale display position is 6, 5, 4, 3, 2, and 1 from the top.
4 scale division sample
5 scale division sample
6 scale division sample
7 scale division sample
8 scale division sample
9 scale division sample
10 scale division sample
11 scale division sample
12 scale division sample
The scale is divided into 4 to 12 sections as shown in the figure above.
• If the scales for two or more channels are specified to the same position, the scale for
the channel that was assigned first to the group is displayed.
Example 1 If the channels were assigned to a group in the following order :
[03.02.01.05]
If the scale display positions for channels 3, 2, 1, and 5 are all set to [1], the scale for
channel 3 is displayed at position 1.
Vacant positions in between scale assigned positions are void. The scales are displayed
close together from the display position 1.
Example 2 If the channels were assigned to a group in the following order :
[01.02.03.05]
If the scale display position for channels 1, 2, 3, and 5 are set to positions 1, 3, 5, and
6, respectively, the scales for the channels are actually displayed at positions 1, 2, 3,
and 4, respectively.
• If the scale display position is set to [Off], the scale is not displayed.
Scale marks
The scale can be divided into 4 to 12 sections using the main scale marks. When the
scale is divided into 4 or 5 section, the area between the main scale marks is divided
further into 10 sections using small and medium marks. When the scale is divided into 6
to 12 sections, the area between the main scale marks is divided further into 5 sections
using small marks.
However, small marks are not displayed for the following cases :
• When the measurement/computation range resolution is smaller than the total number
of sections created by small marks.
• When zone display is used
• When partial expanded display is used
7.10 Setting the Scale Division, Bar Graph Base Position (Bar Graph), and Scale Position (Trend)