Omega RD-MV100 Series, User Manual

Page: 68 / 299

3-7
Names of Parts/Run Mode/Common Operations
3
3.4 Run Mode
There are three run modes on the recorder : operation, setting, and basic setting. This
section describes the functions and relationships of the three modes.
Mode Types
Mode types
Power ON
Setting mode Basic setting mode
MENU
Menu screen
Operation screens
Operation mode
Setting screens Setting screens
Menu screen
MENU or ESC
Pressing FUNC
for 3 seconds
Soft key
MENU or
ESC
Soft key ESC
[END] soft key - DISP/ENTER
Mode Type Description Possible Operations
Operation mode This mode is used for daily operation. Monitoring operation
This mode is entered when the power Data acquisition
is turned ON.
Setting mode This mode is used to configure the Setting the operation
recorder operation such as input Operation related to the file on
range and alarms. the external storage medium
This mode is entered by pressing the
MENU key in the operation mode.
Measured data cannot be displayed in
this mode.
Operations such as measurements,
alarm detection, and data acquisition
are continued.
Basic setting mode This mode is used to configure the Basic settings of the functions
(Setup mode) basic environment of the recorder Operation related to the file on
such as the input format and the data the external storage medium
storage format.
This mode is entered by pressing the
FUNC key for three seconds at the
setting mode menu. This mode cannot
be entered while data acquisition or
computation is in progress.
Operations such as measurements,
alarm detection, and data acquisition
are stopped.