Omega RD-MV100 Series, User Manual

Page: 210 / 299

10-10
10.6 Setting the Memory End Relay Output Time
(Option, /F1, Basic Setting Mode)
This function activates the relay output when the remaining space (time) in the internal
memory or storage medium becomes small.
• Set the minimum storage time of the internal memory at which the relay should be
activated. (The initial setting is 1 hour.)
• This function is valid when the FAIL/Memory End output relay (/F1) option is installed.
Procedure
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Press the soft key
Next 1/3
.
To display the setting screen press the soft key
#5
.
1
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Memory alarm
This is the minimum storage time of the internal memory at which the relay
should be activated.
Select a value from 1 h, 2 h, 5 h, 10 h, 20 h, 50 h, and 100 h.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.