Omega RD-MV100 Series, User Manual

Page: 156 / 299

7-22
7.12 Setting Whether or Not to Use the Partial
Expansion Display (Basic Setting Mode)
Set whether or not to use the partial expansion display.
• The initial value is [Not].
• The display specifications of the partial expansion display are set in the setting mode.
Procedure
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press FUNC for 3 seconds. The menu screen for the basic setting mode appears.
Press the soft key
Next 1/3
.
To display the setting screen press the soft key
#5
.
1
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. Partial
Select [Use] or [Not].
Use : Partial expansion display can be set in the setting mode.
Not : Partial expansion display cannot be set.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.