Omega RD-MV100 Series, User Manual

Page: 251 / 299

12-2
Code Message Explanation/Countermeasures/Ref. Section
90 No permission to enter to the SETUP mode. See sections 10.3 and 10.4.
91 Password is incorrect. See sections 10.1 and 10.3.
92 Press [ESC] key to change to the operation mode. Press the ESC key.
100 IP address doesn’t belong to class A, B, or C. See Communication Interface User’s Manual.
101 The result of the masked IP address is all 0s or 1s. See Communication Interface User’s Manual.
102 SUBNET mask is incorrect. See Communication Interface User’s Manual.
103 The net part of default gateway is not equal to that of IP address. See Communication Interface User’s Manual.
104 FTP client failed because the memory mode is ‘manual’. See Communication Interface User’s Manual.
• Execution Errors
Code Message Explanation/Countermeasures/Ref. Section
150 This action is not possible because sampling is in progress. See sections 8.5 and 8.6.
151 This action is not possible during sampling or calculating. See sections 8.5, 8.6, and 11.3.
152 This action is not possible because saving is in progress. Wait till the saving ends.
153 This action is not possible because formatting is in progress. Wait till the formatting ends.
155 The message is not written while sampling is stopped. See sections 8.5 and 8.6.
160 Cannot load the specified data. Change the memory setting. See sections 4.5, 9.3, and 9.4.
Operation Errors
• Errors Related to External Storage Medium
Code Message Explanation/Countermeasures/Ref. Section
200 Operation aborted because an error was found in media. See Communication Interface User’s Manual.
201 Not enough free space on media. Use another storage medium.
202 Media is read-only. Release the write protection.
210 Media has not been inserted. Insert a storage medium into the drive.
211 Media is damaged or not formatted. Use another storage medium or carry out formatting.
212 Format error. Try formatting again or use another storage medium.
213 The file is read-only. Access to other files or make the file write-enable.
214 There is no file or directory. See Communication Interface User’s Manual.
215 Exceeded the allowable number of files. Delete files or change storage medium.
216 The file or directory name is incorrect. See sections 8.9 and 9.1.
217 Unknown file type. Access to other files.
218 Directory exists. Delete the directory or change directory name. See section 8.9.
219 Invalid file or directory operation. Cannot handle files and directories in the 2nd and
deeper layers.
220 The file is already in use. Try again later. Wait till file is free.
230 There is no setting file. Access to other files.
231 Abnormal setting exists in file. Access to other files.
• Errors Related to Historical Trend
Code Message Explanation/Countermeasures/Ref. Section
232 There is no available data. This message may appear when recalling historical
trend. Access to other files.
233 The specified historical data do not exist. This message may appear when recalling historical
trend. See section 4.5.
234 The specified channel is not assigned to the display group. This message may appear when switching to trend
or bar graph from overview.
See sections 4.4 and 7.6.
12.1 A List of Messages