Omega RD-MV100 Series, User Manual

Page: 234 / 299

11-12
11.5 Setting the Alarm
You can set up to 4 alarms on each computation channel. The alarm types are upper
limit alarm (H), lower limit alarm (L), delay upper limit alarm (T), and delay lower limit
alarm (t). The hysteresis is fixed to 0.
Note
When [Math On/Off] is turn ON, an entry box used to enter the equation is displayed and the
alarm setting boxes are activated (white color). Set the alarm after setting the equation.
When computation is turned On/Off or when equations and span settings are changed, the
alarm setting for that channel is turned OFF.
Procedure
• These procedures are carried out in the setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter. (The
parameters that cannot be changed are grayed).
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press
MENU
.
Twice press the soft key
Next 1/3
.
To display the setting screen press the soft key
#9
.
1
2 3 4 5 6
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
1. First channel and last channel
Select the desired channels. (For the channels set here, the [Math range] is
also simultaneously set.)
2. On/Off
Turn the alarm On (enabled). Items 3, 4 and 5 are displayed.
[On] : Use alarm
[Off] : Do not use alarm