Omega RD-MV100 Series, User Manual

Page: 182 / 299

8-23
Data Acquisition and Saving to External Storage Medium
8
8.11 Setting the Method of the Display/Event Data
Acquisition (Basic Setting Mode)
Set the method of the display/event data acquisition.
Procedure
• These procedures are carried out in the basic setting mode.
• Use the arrow keys to move the cursor (blue) to the appropriate parameter.
• The possible selections are displayed at the bottom of the screen. Select using the
soft keys.
• The parameter boxes that are changed are displayed in yellow. By confirming the
new settings, they change back to white.
Press MENU .
Press FUNC for 3 seconds. The menu screen for the basic setting mode appears.
To display the setting screen press the soft key
#3
.
1
2
3
4
5
6
7
8
The numbers in front of the operating procedure shown below correspond to the
numbers in the above figure.
Data save to the external storage medium
1. Save
Set save method to the external storage medium.
Select [Auto] or [Manual].
Auto : auto save
Manual : manual save
Note
If [Manual] (manual save) is selected in step 1, set whether to save all the data in the internal
memory or only the data that have not been saved when the storage medium is inserted into
the drive and the front cover is closed. See section 8.9.
Data acquisition
• Acquiring only the display data
2. Data
Select [Display].
Note
If [Auto] (auto save) is selected in step 1 and [Display] is selected in step 2, set the auto save
interval for the display data. See section 8.8.