Omega RD-MV100 Series, User Manual

Page: 150 / 299

7-16
Setting the number of divisions for the scale
2. Division
This is the number of scale divisions. The scale is equally divided and scale
marks are displayed at the divided position. Select the number of divisions from
4 to 12.
For bar graph display : Only the main scale marks are displayed.
For trend display : See the explanation.
Setting the bar graph’s base position
3. Bar graph (base position of the bar graph)
Select normal or center.
Note
When the bar graph is displayed vertically (see section 7.13), the base position is fixed to
[Normal] (the bottom of the bar graph is the base position).
Setting the scale position on the trend display
4. Scale position
The [Scale position] is used to set the scale display position for each channel
when the scale display is turned [On] (see section 4.3) on the trend display.
Select the position from [1] to [6]. Select [Off] for channels without scale.
Note
• The scale for the channels that are assigned to the group in the trend display are displayed.
• The larger the number of scales to be displayed, less amount of area there is to display the
waveform.
Confirming operation
To confirm the new settings, press the DISP/ENTER key.
To cancel the new settings, press the ESC key. A window appears for you to confirm the
cancellation. Select [Yes] using the arrow keys and press the DISP/ENTER key.
7.10 Setting the Scale Division, Bar Graph Base Position (Bar Graph), and Scale Position (Trend)