Omega RD-MV100 Series, User Manual

Page: 276 / 299

14-12
3 terminal Isolated RTD Input (/N2) :
A, B, b terminals are of isolated input type.
* Can be specified only for RD-MV106 and RD-MV112.
A,B,b terminals of RD-MV102 and RD-MV104 are isolated as standard.
12 VDC Power Supply:
Powered by 12 VDC
For related specifications, see “Power Supply,” “Normal Operating Conditions,” “Effects
of Operating Conditions,” and “Other Specifications” in section 14.7.
Rated power supply : 12 VDC
Allowable power supply voltage range :
10 to 18 VDC
Rated power consumption :
30 VA
Remote Control (/R1) :
This option allows the following functions to be controlled remotely by a contact input (up
to eight contact inputs) :
• Start/stop of memory (rising and falling edge)
• Trigger for event data acquisition (trigger, 250 ms or longer)
• Time adjustment (adjusting the time to a preset time upon contact signal, trigger, 250
ms or longer)
Time of Trigger-On Processing
Cut off reading of less than one minute.
e.g. 10:00:50 is corrected as 10:00:00
Round up reading of less than one minute.
e.g. 10:59:50 is corrected as 11:00:00
No process is to be performed.
hh:00:00 to hh:01:59
hh:58:00 to hh:59:59
hh:02:00 to hh:57:59
• Start/stop of computation (rising and falling edge)
• Reset of computation data (trigger, 250 ms or longer)
• Manual sample (trigger, 250 ms or longer)
• Message display (Up to 8 different messages can be set, trigger, 250 ms or longer)
• Load of setting parameters (Up to 3 settings can be set, trigger, 250 ms or longer)
• Alarm acknowledgement (trigger, 250 ms or longer)
14.6 Specifications of Optional Functions