Omega RD-MV100 Series, User Manual

Page: 72 / 299

3-11
Names of Parts/Run Mode/Common Operations
3
Configuration Details
The configuration details of the setting mode and the basic setting mode are shown
below. Enclosed in parentheses are reference sections.
Settings related to the input
Item Setting Mode Basic Setting Mode
Scan interval • Scan interval
Input specifications • Input type
(5.1 to 5.7) • Measurement range
• Upper and lower limit of span
• Reference channel for differential
computation
• Upper and lower limits of scale
• Unit
Burnout (5.9) • Burn out Off/Up/Down
Reference junction • Switch between [Internal] and
compensation [External]
• Compensation voltage when set to
[External]
Noise elimination • Filter time constant/Off (RD-MV102/• Integration time of the A/D
RD-MV104) (5.8) converter (5.9)
• Number of samples for the moving
average/Off (RD-MV106/RD-MV112) (5.8)
Settings related to the alarm
Item Setting Mode Basic Setting Mode
Alarm • Alarm type (6.2) • Display hold/non-hold (6.4)
• Alarm value (6.2) • The time interval for the rate-of-
• Output relay On/Off (6.2) change alarm (for measurement
• Output relay number (6.2) channels only) (6.4)
• Alarm delay time (6.3) • Hysteresis (for measurement
channels only) (6.4)
Alarm output relay • Reflash alarm
operation (option) • AND operation
(6.4) • Relay energize/de-energize
• Relay hold/non-hold
3.5 Configuring the Functions