Omega RD-MV100 Series, User Manual

Page: 83 / 299

3-22
Entering Characters
Used to set tag names, set message strings, set or enter passwords.
Window for entering characters
Select character
Insert/overwrite
Selected character type
Procedure
When the window used to enter the string appear, enter the characters according to the
following key operations.
• Left and right arrow keys : Selects the input position
• Up and down arrow key : Enters the character
• [A/a/1] soft key : Select upper-case alphabet (A), lower-case alphabet (a), or
numbers (1).
The character type is switched in the following order each time the [1/a/A] soft key is
pressed. The selected character type is displayed to the right down of the input
window.
Upper-case alphabet (A)
→
lower-case alphabet (a)
→
numbers (1)
• [DEL] soft key : Deletes the character at the cursor position.
• [BS] soft key : Deletes the character to the left of the cursor position.
• [INS] soft key : Selects insert or overwrite
Insert and overwrite modes switch each time the [INS] soft key is pressed. The
selected mode is displayed to the right down of the input window.
Copying a Character String
Procedure
To copy a character string to another box, follow the procedures below.
1. Move the cursor to the copy source string and press the [Copy] soft key.
2. Move the cursor to the copy destination box and press the [Paste] soft key. The
character string is copied.
Clearing the character string
1. To clear the character string, press the [Clear] soft key.
3.6 Common Key Operations