Oce arizona 1240 GT, User Manual

Page: 37 / 212

Component Function
8) Print Button Starts the current print job.
9) Maintenance Station Designated area for cleaning the printheads and the underside of
the carriage.
10) Vacuum Zone Control
Handles (image 2)
10) on image 1 shows op-
tional RMO Five vacuum zone control handles determine if vacuum zones 2 to
6 on the printer table are active when the vacuum pump is switch-
ed on. Zone 1 is always on so it has no control handle. The zones
on the Océ Arizona 1200 XT model are different (see Chapter 6 for
details).
11) Automatic Maintenance
Station (optional) Provides a station where printheads can be parked on a vacuum
system that pulls debris and particulate matter from the nozzles.
12) Ink Filters Ink filters are behind a door under the ink bags. The filters remove
unwanted particulate matter from the ink.
(13) Coolant Bottle Provides coolant to maintain correct temperature of the ink in the
printheads.
(14) Vacuum Table Foot
Switch Toggles the pump that turns the table vacuum on/off. Vacuum
must be on prior to starting a print.
(15) Ink Bay There are two ink bays: the Primary bay contains CMYK ink and
the coolant bottle; the Secondary bay holds any additional suppor-
ted color channels.
[29] Ink Bays and Vacuum Zone Control Handles
Operator Interface Hardware
Chapter 4 - How to Navigate the User Interface 37
Océ Arizona 1200 Series