Oce arizona 1240 GT, User Manual

Page: 199 / 212

11.
Pick up the new bulb by its ceramic ends and power wires, and then insert the bulb into the
retainer clips.
12.
Reconnect the bulb power connectors at both ends.
13.
Close the lamp assembly by rotating the top down.
14.
Reinstall the lamp filter on top of the lamp housing.
15. Reinstall the magnetic lamp top cover to secure the filter.
16. Repeat this procedure if necessary to change the bulb on the other side of the carriage.
17. Replace the safety fence.
18. From the User Interface, reset the lamp bulb hours for the bulb replaced, then click on Back to
exit.
19. Dispose of the old UV lamp bulbs according to local environmental regulations for products that
contain mercury.
CAUTION
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR
DISPOSED OF ACCORDING TO LOCAL, MUNICIPAL, STATE, PROVINCIAL, OR
FEDERAL LAWS. For lamp recycling and disposal information please call 1-800-OK-
CANON for the USA and Canada. Refer to Chapter 3 Safety Information / UV Curing
System for more information.
In Europe UV lamp bulbs must be treated separately according Directive 2012/19/EU
(Waste Electrical and Electronic Equipment). European Waste Catalogue (EWC)
number of the mercury containing fluorescent lamp: 20 01 12.
Change Both UV Lamp Bulbs
Chapter 12 - Printer Maintenance 199
Océ Arizona 1200 Series