Oce arizona 1240 GT, User Manual

Page: 192 / 212

Bleed Ink Filter
Introduction
Ink filters contain air that must be released. Although, you can select Done or Postpone even if
the task is not complete, it is in your best interest to follow the recommended schedule. If you
don't bleed the filters you will see poor image quality. Air in the ink filter can affect the vacuum
and result in dripping ink and deteriorated image quality as a result of nozzle dropout. Bleeding
the ink filters is a strategy to avoid persistent nozzle dropout. Failure to bleed the ink filters can
lead to an overflow of ink that will result in ink dripping from the carriage and you may need to
place a service call. You will be notified by the printer UI when it is necessary to change or bleed
a filter.
When to do
New ink filters contain air that must be released. Also after a period of use all ink filters will
contain air. Follow the schedule for bleeding ink filters indicated in the Maintenance Tasks tab.
Before you begin
The filters are bled using a 60 ml syringe. If bleeding after an ink bag change, let the ink fill finish
before bleeding the filter. The filters should be bled while the printer is idle; that is, there should
be no active printing.
CAUTION
Wear nitrile gloves, glasses with side shields and a smock when handling UV ink. Use gloves
only one time and change if contaminated.
Review the safety section in Maintenance guidelines.
Bleed Ink Filter
192 Chapter 12 - Printer Maintenance
Océ Arizona 1200 Series