Nortel Observe, User Manual

Page: 42 / 143

Nortel Proprietary
10. Click Close .
To activate modifications to the RSM settings: multicast IP group, TTL, and
IP port
1. Click Start -> Settings -> Control Panel.
2. Click
Services .
Result : The Services window opens.
3. From the list of services, select the SDP_Service.
4. Click
Stop.
5. Click Start.
6. Click Close.
Tip : If you are having problems stopping and starting the SDP_Service, you can
temporarily disable it. When you disable the SDP_Service, it automatically stops
running. After the service is disabled, reset it to start automatically, and then restart
the service.
1. In the Services window, click the
SDP_Service .
2. Click Startup .
Result : The Service dialog box appears.
3. Click Disabled .
Result : The SDP_Service is disabled.
4. Click OK to return to the Services window.
5. With the SDP_Service highlighted, click Stop .
Result : The SDP_Service stops.
6. Click Startup .
Result : The Service dialog box appears.
7. Click Automatic .
Result : The SDP_Service is set to automatically start when the system
starts.
8. Click OK to return to the Services window.
9. With the SDP_Service highlighted, click Start to restart the service.
10. Click Close .
Planning, Installation and Administration Guide
42