Nortel Proprietary
9.4 VxWorks Shell
The VxWorks shell, which is used for doing some basic OA&M (the most
important of which is loadware upgrade), can be accessed via a serial connection to
COM1 or via a telnet connection. The shell is protected from unauthorized access
by a username and password. This password is common across FTP, telnet and the
serial port. If the shell is idle for a period of time the password and username must
be reentered to gain access.
Note:
Once the shell username and password have been successfully entered the
user has complete access to all the VxWorks commands. Incorrect usage of some
shell commands will cause the Nortel Remote Agent Observe card to reboot and
may change operational behavior.
Note:
The default username is “raoadmin” and the default password is
“raosecurity”
Planning, Installation and Administration Guide
110
