Nortel Proprietary
•
On the last configured TUI port, set the Hunt DN to the SCR key DN of the first
TUI port (port 0).
•
If only one TUI port is configured, no hunt DN is required.
Figure 54 below shows a sample configuration of SCR DNs and Hunt DNs for 16
configured TUI ports.
TUI Port
HUNT DN
SCR Key DN
0
1001 (TUI Port 2 SCR key DN)
1000 (old MCR DN)
2
1002 (TUI Port 4 SCR key DN)
1001
4
1003 (TUI Port 6 SCR key DN)
1002
6
1004 (TUI Port 8 SCR key DN)
1003
8
1005 (TUI Port 10 SCR key DN)
1004
10
1006 (TUI Port 12 SCR key DN)
1005
12
1007 (TUI Port 14 SCR key DN)
1006
14
1008 (TUI Port 16 SCR key DN)
1007
16
1009 (TUI Port 18 SCR key DN)
1008
18
1010 (TUI Port 20 SCR key DN)
1009
20
1011 (TUI Port 22 SCR key DN)
1010
22
1012 (TUI Port 24 SCR key DN)
1011
24
1013 (TUI Port 26 SCR key DN)
1012
26
1014 (TUI Port 28 SCR key DN)
1013
28
1015 (TUI Port 30 SCR key DN)
1014
30
1000 (TUI Port 0 SCR key DN)
1015
Figure 54
Sample Configuration for TUI ports
9. Using the information gathered in the “Switch Configuration Chart”, re-configure the
required TUI ports in overlay 11 as described in Figure 55 below.
Prompt
Response
Description
REQ:
NEW CHG
Add or change
TYPE:
2616
Ports must be configured as M2616
TN
l s c u
Terminal Number.
DES
d..d
Designator.
CUST
0-99
…
CLS
Class of service entries are separated by a space
UNR
Unrestricted Access.
FLXA
Flexible Voice/Data Ports Allowed (
Required for
ports 16–31 only)
VCE
Voice Port (
Required for ports 16–31 only)
WTA
Warning Tone Allowed (
Required for ports 16–31
only)
Planning, Installation and Administration Guide
140
