Nortel Observe, User Manual

Page: 112 / 143

Nortel Proprietary
9.6 Application Level Debugging
Task Logging Commands
The following table shows the commands used to turn on and off logging for each
of the individual tasks in the Nortel Remote Agent Observe Application.
Task Turn Logging: Parameters
On Off
DSPM gLogDspm=1 gLogDspm=0
TUI tuiDebugOn tuiDebugOff
Aries AriesDebugOn 0,X ariesDebugOff 0,X 0,X -- range of channels
tcmDebugOn 0,X tcmDebugOff 0,X
VP-App vpDebugOn vpDebugOff
Reporting reportDebugOn reportDebugOff
BUI gLogPack=1 gLogPack=0
gLogBuiPack=1 gLogBuiPack=0
RSM Parsing rsmDebugOn rsmDebugOff
rsmExtraDebugOn rsmExtraDebugOff
RSM Table rsmTableDebugOn rsmTableDebugOff
RSM Monitor rsmMonDebugOn rsmMonDebugOff
Table 17 Task Logging Commands
Rsm Parsing Debugging
For the RSM parsing task, the following additional commands can be used to
debug:
turnRsmLoggingTempOn(noOfSamples, level)
which turns on RSM logging for a specified duration
Where:
noOfSamples – indicates no of sets of data to turn on logging for
Level – indicates level of debugging to turn on where:
Normal : 0
Detailed : 2
Both : 1
rsmTracingOn(int agentStep, int agentRefreshDelay)
which displays contents of parsed agent stream
where
agentStep – indicates step through table
agentRefreshDelay – how often to print out the parameter details
rsmTracingOff()
which turns off the display of the parsed agent stream
Planning, Installation and Administration Guide
112