Nortel Observe, User Manual

Page: 41 / 143

Nortel Proprietary
Controller utility and click Apply . After you click Apply in the RTD Multicast
Controller utility, you must stop and restart the SDP Service.
1. Navigate to the folder in which the utility is installed:
[drive]:\Nortel\iccm\bin
2. Double-click MulticastCtrl.exe .
Result : The RTD Multicast Controller window appears.
3. Click Apply .
4. Click Close .
5. Click Start -> Settings -> Control Panel.
6. Click
Services .
Result: The Services window opens.
7. From the list of services, select the SDP_Service.
8. Click
Stop .
9. Click Start .
Result : The system retrieves the new multicast rates from the appropriate
registry, and RSM begins transmitting at the new rate.
10. Click Close .
Tip: If you are having problems stopping and starting the SDP_Service, you can
temporarily disable it. When you disable the SDP_Service, it automatically stops
running. After the service is disabled, reset it to start automatically, and then restart
the service.
1. In the Services window, click the
SDP_Service .
2. Click Startup .
Result : The Service dialog box appears.
3. Click Disabled .
Result : The SDP_Service is disabled.
4. Click OK to return to the Services window.
5. With the SDP_Service highlighted, click Stop .
Result : The SDP_Service stops.
6. Click Startup .
Result : The Service dialog box appears.
7. Click Automatic .
Result : The SDP_Service is set to automatically start when the system
starts.
8. Click OK to return to the Services window.
9. With the SDP_Service highlighted, click Start to restart the service.
Planning, Installation and Administration Guide
41