Nortel Proprietary
5. The bootROM can be upgraded by typing the following from the shell:
upgradePCMCIABoot “/C:/bootROM”<CR>.
Where <Server IP Address> is the IP address of the Nortel Remote Agent
Observe Card. <userid> and <password> are the same as the shell username/
password on the Nortel Remote Agent Observe Card. <path> is the location on
the card where the bootROM loadware is located.
6. When the upgrade function is complete, reboot the card.
BootROM loadware upgrade using FTP to transfer loadware to Compact
Flash Card.
1. FTP the bootROM loadware onto the “/C:” drive using the same method to that
outlined above for transferring the application load.
2. Reboot the card and boot into the bootROM load. To enter the bootROM load,
reboot the card and when the card is rebooting, the user will be prompted to
enter “jkl” to gain access to the bootROM.
3. The bootROM can be upgraded by typing the following from the shell:
upgradeBoot “<server IP address>”, “<userid>”, “<password>”,
“<path>”, “<filename>” <CR>.
Where <Server IP Address> is the IP address of the Nortel Remote Agent
Observe Card. <userid> and <password> are the same as the shell username/
password on the Nortel Remote Agent Observe Card. <path> is the location on
the card where the bootROM loadware is located.
4. When the upgrade function is complete, reboot the card.
Planning, Installation and Administration Guide
126
