Nortel Proprietary
10
11
12
13
14
15
DATE 7 OCT 2003
Figure 6 Observe Port Switch Configuration
Enabling Nortel Remote Agent Observe units
Overlay 32 – When Switch Configuration is complete, enable the Nortel Remote
Agent Observe Units as follows:
Command
Description
ENLC l s c u
Enable the pre-configured unit
Figure 7 LD 32 Enable Nortel Remote Agent Observe unit.
Caution: Never configure or enable more units on a Nortel Remote Agent
Observe card slot than the keycode allows. Otherwise, calls to the card get
routed to ports not acquired by the Nortel Remote Agent Observe application
and are not answered.
Figure 8 is a sample LD 32 status for a card with 16 Nortel Remote Agent Observe
sessions configured.
00 = UNIT 00 = IDLE (2616)
01 = UNIT 01 = IDLE (2616 LOG OUT)
02 = UNIT 02 = IDLE (2616)
03 = UNIT 03 = IDLE (2616 LOG OUT)
04 = UNIT 04 = IDLE (2616)
05 = UNIT 05 = IDLE (2616 LOG OUT)
06 = UNIT 06 = IDLE (2616)
07 = UNIT 07 = IDLE (2616 LOG OUT)
08 = UNIT 08 = IDLE (2616)
09 = UNIT 09 = IDLE (2616 LOG OUT)
10 = UNIT 10 = IDLE (2616)
11 = UNIT 11 = IDLE (2616 LOG OUT)
12 = UNIT 12 = IDLE (2616)
13 = UNIT 13 = IDLE (2616 LOG OUT)
14 = UNIT 14 = IDLE (2616)
15 = UNIT 15 = IDLE (2616 LOG OUT)
16 = UNIT 16 = IDLE (2616)
17 = UNIT 17 = IDLE (2616 LOG OUT)
18 = UNIT 18 = IDLE (2616)
19 = UNIT 19 = IDLE (2616 LOG OUT)
20 = UNIT 20 = IDLE (2616)
21 = UNIT 21 = IDLE (2616 LOG OUT)
22 = UNIT 22 = IDLE (2616)
23 = UNIT 23 = IDLE (2616 LOG OUT)
24 = UNIT 24 = IDLE (2616)
25 = UNIT 25 = IDLE (2616 LOG OUT)
26 = UNIT 26 = IDLE (2616)
27 = UNIT 27 = IDLE (2616 LOG OUT)
Planning, Installation and Administration Guide
33
