nord NORDAC FLEX SK 2 E-111-123-A Series, User Manual

Page: 211 / 284

5 Parameter
BU 0200 en-US-4920 211
Pos : 577 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P700- P799/Param et er P708 – Zust and Digital eing äng e [ SK 2x xE] @ 2\mod_1346932204549_14638.docx @ 43484 @ @ 1
P708
State of digital input
(digital input status)
00000 ... 11111
(bin)
or
0000 ... FFFF
(hex)
Displays the status of the digital inputs in binary/hexadecimal code. This display can be used to
check the input signals.
Bit 0 = Digital input 1
Bit 1 = Digital input 2
Bit 2 = Digital input 3
Bit 3 = Digital input 4
Bit 4 = PTC resistor input
Bits 5 - 7 reserved
Pos : 578 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P700- P799/Param et er P708 – Zust and Digital eing äng e_T eil 2/ 2 [ SK 1x 0E, SK 2x xE, SK 2xx E-FDS] @ 9\mod_1448441143299_14638.docx @ 266699 @ @ 1
First SK xU4-IOE (optional)
Bit 8 = 1st IO extension: Digital input 1
Bit 9 = 1st IO extension: Digital input 2
Bit 10 = 1st IO extension: Digital input 3
Bit 11 = 1st IO extension: Digital input 4
Second SK xU4-IOE (optional)
Bit 12 = 2nd IO extension: Digital input 1
Bit 13 = 2nd IO extension: Digital input 2
Bit 14 = 2nd IO extension: Digital input 3
Bit 15 = 2nd IO extension: Digital input 4
Bits 15-12 Bits 11-8 Bits 7-4 Bits 3-0
Minimum value
0000
0
0000
0
0000
0
0000
0
Binary
hex
Maximum value
1111
F
1111
F
1111
F
1111
F
Binary
hex
Simple Box: The binary bits are converted to a hexadecimal value and displayed.
Parameter Box: The bits are displayed increasing from right to left (binary).
Pos : 579 /Allgem ein/ Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0. doc x @ 2265496 @ @ 1
Pos : 580 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P700- P799/Param et er P709 – Spannung Analog eingang [ SK 2x xE] @ 2\mod_1346932205173_14638.docx @ 43508 @ @ 1
P709
[-01]
...
[-09]
Analog input voltage
(analog input voltage)
-100 ... 100 % Displays the measured analog input value.
SK 2x0E SK 2x5E
[-01] = Analog input 1 , value of analog input
1 integrated in the VFD.
[-01] = Potentiometer 1 , internal
potentiometer P1 in the VFD (chapter
4.3.2), for setting the maximum
frequency, minimum frequency and
ramp time
[-02] = Analog input 2 , value of analog input
2 integrated in the VFD.
[-02] = Potentiometer 2 , same as
potentiometer 1
SK 2xxE
[-03] = Ext. Analog in 1, AIN 1 of the first SK xU4-IOE I/O extension
[-04] = Ext. Analog in 2, AIN2 of the first SK xU4-IOE I/O extension
[-05] = Setpoint module , SK SSX-3A, see BU0040
SK 2xxE, size 1 – 3 SK 2x0E, size 4
[-06] = Analog function dig. . 2 , analog
function of VFD digital input 2
[-06] = Potentiometer 1 , internal
potentiometer P1 in the VFD (chapter
4.3.2), for setting the maximum
frequency, minimum frequency and
ramp time
[-07] = Analog function dig. . 3 , analog
function of VFD digital input 3
[-07] = Potentiometer 2 , same as
potentiometer 1