NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
210
BU 0200 en-US-4920
Pos : 571 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P700- P799/Param et er P703 – Strom l etz te St örung 1.. .5 @ 0\m od_1328170627489_14638. docx @ 15106 @ @ 1
P703
[-01]
...
[-05]
Current. Last error
(last current fault 1...5)
S
0.0 ... 999.9 A
This parameter stores the output current that was being delivered at the time the fault occurred.
The values of the last 5 errors are stored.
The Simple Box/Control Box must be used to select the corresponding memory location 1...5-
(array parameter), and confirmed using the OK/ENTER key to read the stored value.
Pos : 572 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P700- P799/Param et er P704 – Spannung letzt e St örung 1... 5 @ 0\m od_1328170671391_14638. docx @ 15107 @ @ 1
P704
[-01]
...
[-05]
Voltage last error
(last voltage error 1...5)
S
0 ... 600 V AC
This parameter stores the output voltage that was being delivered at the time the fault occurred.
The values of the last 5 errors are stored.
The Simple Box/Control Box must be used to select the corresponding memory location 1...5-
(array parameter), and confirmed using the OK/ENTER key to read the stored value.
Pos : 573 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P700- P799/Param et er P705 – Zwisc henkreis spannung l etz te Stör ung 1.. .5 @ 0\m od_1328170720639_14638.docx @ 15108 @ @ 1
P705
[-01]
...
[-05]
Dc. Ink volt. Last error
(
last DC link voltage fault 1...5)
S
0 ... 1000 V DC
This parameter stores the DC link voltage that was being delivered at the time the fault occurred.
The values of the last 5 errors are stored.
The Simple Box/Control Box must be used to select the corresponding memory location 1...5-
(array parameter), and confirmed using the OK/ENTER key to read the stored value.
Pos : 574 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P700- P799/Param et er P706 – Param et ersatz l etzt e St örung 1.. .5 @ 0\m od_1328170810570_14638. docx @ 15109 @ @ 1
P706
[-01]
...
[-05]
P set last error
(parameter set, last fault 1… 5)
S
0 ... 3
This parameter stores the parameter set code that was active when the error occurred. Data for
the previous 5 faults are stored.
The Simple Box/Control Box must be used to select the corresponding memory location 1...5-
(array parameter), and confirmed using the OK/ENTER key to read the stored error code.
Pos : 575 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P700- P799/Param et er P707 – Sof twar e-Version/-Revision @ 0\mod_1328171743458_14638. doc x @ 15110 @ @ 1
P707
[-01]
...
[-03]
Software-Version
(Software version/revision)
0.0 ... 9999.9
This parameter shows the software and revision
numbers in the VFD. This can be significant
when different VFDs are assigned the same
settings.
Array 03 provides information about any special
versions of the hardware or software. A zero
stands for the standard version.
... [-01] =
version number (Vx.x)
... [-02] =
revision number (Rx)
... [-03] =
special version of hardware/software
(0.0)
Pos : 576 /Allgem ein/ Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0. doc x @ 2265496 @ @ 1
