5 Parameter
BU 0200 en-US-4920
185
Pos : 471 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P400- P499/Param et er P480 – Funk tion Bus I/ O I n Bits [SK 1x 0E, SK 2xx E] @ 2\m od_1346931810637_14638. docx @ 42908 @ @ 1
P480
[-01]
...
[-12]
Function BusIO In Bits
(Function Bus I/O In Bits)
0 ... 80
{ [-01] = 01 }
{ [-02] = 02 }
{ [-03] = 05 }
{ [-04] = 12 }
{ [-05...-12] = 00 }
The Bus I/O In Bits are perceived as digital inputs. They can be set to the same functions (P420).
With devices with an integrated AS interface, the I/O bits can be used by the interface itself (bit 0
... 3) or in combination with I/O extensions (SK xU4-IOE) (bits 4 … 7 and bits 0 … 3).
The priority
in AS-i devices is AS-i. In this case, BUS IO BITs 1 … 4 cannot be used by the 2nd IO extension.
[-01] = Bus/AS-i Dig In1
(Bus IO In Bit 0 + AS-i 1 or DI 1 of the
second
SK xU4-IOE (DigIn 09))
[-02] =
Bus/AS-i Dig In2
(Bus IO In Bit 1 + AS-i 2 or DI 2 of the
second
SK xU4-IOE (DigIn 10))
[-03] =
Bus/AS-i Dig In3
(Bus IO In Bit 2 + AS-i 3 or DI 3 of the
second
SK xU4-IOE (DigIn 11))
[-04] =
Bus/AS-i Dig In4
(Bus IO In Bit 3 + AS-i 4 or DI 4 of the
second
SK xU4-IOE (DigIn 12))
[-05] =
Bus/IOE Dig In1
(Bus IO In Bit 4 + DI 1 of the
first
SK xU4-IOE (DigIn 05))
[-06] =
Bus/IOE Dig In2
(Bus IO In Bit 5 + DI 2 of the
first
SK xU4-IOE (DigIn 06))
[-07] =
Bus/IOE Dig In3
(Bus IO In Bit 6 + DI 3 of the
first
SK xU4-IOE (DigIn 07))
[-08] =
Bus/IOE Dig In4
(Bus IO In Bit 7 + DI 4 of the
first
SK xU4-IOE (DigIn 08))
[-09] =
Flag 1
1)
[-10] =
Flag 2
1)
[-11] =
Bit 8 BUS controlword
[-12] =
Bit 9 BUS controlword
The possible functions for the bus In bits can be found in the table of functions for the digital
inputs in parameter (P420). Functions {14} "Remote control" and {29} "Enable Setpoint Box" are
not possible.
1) The flag function is only possible with control via control terminals.
Pos : 472 /Anleit ungen/El ektr onik /FU und St art er/5. Par ameter/ Par ameter auflist ung (P000 .. .)/P400- P499/Param et er P481 – Funk tion Bus I/ O Out Bi ts [ SK 1x0E, SK 2xxE] @ 2\mod_1346931811511_14638. doc x @ 42932 @ @ 1
P481
[-01]
...
[-10]
Funct.
BusIO Out Bits
(Function Bus I/O Out Bits)
0 ... 40
{ [-01] = 18 }
{ [-02] = 08 }
{ [-03] = 30 }
{ [-04] = 31 }
{ [-05...-10] = 00 }
The bus I/O Out bits are perceived as multi-function relay outputs. They can be set to the same
functions (P434).
With devices with in integrated AS interface, the I/O bits can be used by the interface itself (bit 0
... 3) or in combination with I/O extensions (SK xU4-IOE) (bits 4 … 5 and flags 1 … 2).
[-01] =
Bus / AS-i Dig Out1
(Bus IO Out Bit 0 + AS-i 1)
[-02] =
Bus / AS-i Dig Out2
(Bus IO Out Bit 1 + AS-i 2)
[-03] =
Bus / AS-i Dig Out3
(Bus IO Out Bit 2 + AS-i 3)
[-04] =
Bus / AS-i Dig Out4
(Bus IO Out Bit 3 + AS-i 4)
[-05] =
Bus / IOE Dig Out1
(Bus IO Out Bit 4 + DO 1 of the
first
SK xU4-IOE (DigOut 02))
[-06] =
Bus / IOE Dig Out2
(Bus IO Out Bit 5 + DO 2 of the
first
SK xU4-IOE (DigOut 03))
[-07] =
Bus / 2nd IOE Dig Out1
(Flag 1
1)
+ DO 1 of the
second
SK xU4-IOE (DigOut 04))
[-08] =
Bus / 2nd IOE Dig Out2
(Flag 2
1)
+ DO 2 of the
second
SK xU4-IOE (DigOut 05))
[-09] =
BUS statusword Bit 10
[-10] =
BUS statusword Bit 13
The possible functions for the Bus Out Bits can be found in the table of functions for the digital
outputs (P434).
1) The flag function is only possible with control via control terminals.
Pos : 473 /Allgem ein/ Allgem eingültig e Module/---------Seitenumbr uc h k ompakt --------- @ 13\m od_1476369695906_0. doc x @ 2265496 @ @ 1