NorAM 65E Turbo Motor Grader, Service Manual

Page: 572 / 830

65E Turbo Motor Grader
Service Manual
Service 2.00_2013.03 8 - 40
Section 8
Hydraulics
Step 6: Raise the cap, 1, up against the detent sleeve.
Place washer, 2, on end of cap and secure with snap
ring, 3.
Step 7: With ports down and check valve visible, clevis
end of spool is on left Insert spool into housing, 1.
Carefully seat seal and wiper in counterbore in housing.
Secure cap, 2, to housing with socket head screws, 3.
Torque socket head screws to 8
- 11 Nm (6 - 8 Ib - ft).
Step 8: Slide spacer, 1, onto spool, 2, with O - ring against
housing, 3. Slide O - ring and wiper onto spool against
spacer. Install lock ring, 4, and screw spacers, 5, and
secure with socket head screws, 6, to 8
- 11 Nm
(6 - 8 Ib - ft).
NOTE: To reassemble the standard and float sections,
perform Valve Assembly steps 1 - 7, and Valve Installation
steps 1 - 16.