R e p a i r M a n u a l
Corporate Division
Off-Road Driveline Technology
and Axle Systems
5871 146 002
10/5
Fix screen sheets by means of cylindrical screws (1).
Tightening torque (M8/8.8x12) ................ M
A
= 23 Nm
Mount O-rings 22x3 (2) into the annular groove of the oil tubes
and oil them.
Install, grease and centrically align rectangular rings (arrows).
Wet mounting face (3) with sealing agent Loctite (type No. 574).
Figure 17
Carefully bring the housing front part into contact position with
the housing rear part by using the lifting device.
Pay attention that both oil tubes are aligned with the holes in
the housing rear part.
(S) Lifting chain
5870 281 047
(S) Eye bolts 2x (M20)
0636 804 003
(S) Eye nuts (M12)
0664 462 774
Figure 18
Fit both cylindrical pins (1) centrically to the mounting face.
Figure 19
Checking of clearance of the gear drive train
Position driving element (S) and rotate KV clutch shaft.
If you notice an interference of the movable parts (e.g. on the
screen sheet or on the oil tubes), you must correct this fault!
Do this step on all clutch shafts!
(S) Driving element
5870 345 089
(S) Crank handle
5870 280 007
Figure 20
S
1
1
1
2
2
3
Summary of Contents for 65E Turbo Motor Grader
