NorAM 65E Turbo Motor Grader, Service Manual

Page: 566 / 830

65E Turbo Motor Grader
Service Manual
Service 2.00_2013.03 8 - 34
Section 8
Hydraulics
Standard Section Disassembly
Step 1: Secure section in vice. Use care to prevent
damage to the machined sealing surfaces, 1, on the
side of the housing.
Step 2: Remove screws, 2, securing lock ring on clevis
end of spool, 3. Remove lock ring.
Step 3: Remove screws, 4, securing end cap, 5, and lock
ring, 6, to the other end of the section housing. Remove
cap and lock ring.
Step 4: Carefully pull spool, 1, from the section housing.
Wiper, 2, and seal, 3, will stay on spool as it is pulled
from housing.
Step 5: Carefully place clevis end of spool in a vise.
Remove screw, 1, from end of spool. Remove spring
seats, 2, and centering spring, 3, from spool. Remove
lock ring, 4, wiper and seal from end of spool. Discard
wiper and seal.