65E Turbo Motor Grader
Service Manual
2
-
29
Service 2.00_2013.03
Section 2
Engine
When the DPF reaches 90% soot-load, the automatic regeneration cycle is activated. It is possible to inhibit
the automatic regeneration cycle by placing the Regeneration Inhibit Switch in the “ON” position.
When the DPF reaches 130% soot-load, a force regeneration cycle can be activated. The electronic display
shows it is required to activate a regeneration cycle.
When the diesel particulate DPF reaches 180% soot-load, a force regeneration cycle can be activated. Engine
power derates dependent on the soot-load and the electronic display shows it is required to activate a
regeneration cycle.
When the diesel particulate filter (DPF) reaches 250% soot-load, the engine will shutdown. Before engine is
started, filter must be replaced.
When the preceding states are achieved, the following symbols are displayed on the electronic display.
On
Off
Off
High Exhaust
Temperature On During Active Regeneration.
The lamp will switch Off 1 min after
regeneration has completed.
Off
On
Off
DPF Above 130% Soot
loading, warns the operator that regeneration is
required
Off
Off
On
Regeneration disabled by
operator or machine
Off
On
Off
DPF Above 180% Soot
Loading, engine power derates dependent on
soot load, regeneration required
Off
On
Off
DPF Above 250% Soot
Loading, engine shutdown
State Description
Regeneration
Active
(Also known as
HEST Lamp)
Diesel
Particulate
Filter
DPF Disabled
Summary of Contents for 65E Turbo Motor Grader
