R e p a i r M a n u a l
Corporate Division
Off-Road Driveline Technology
and Axle Systems
5871 146 002
16/7
Mount stud bolts (1).
Wet screw-in thread with Loctite (type No. 243)!
Tightening torque (M8/10.9x25) ............... M
A
= 15 Nm
Place seal (2) and duct plate (3) at the housing rear part until
contact is obtained.
Use assembly grease!
Figure 24
Figure 25
Fix duct plate (1) by means of Torx screws (2) and hexagon nuts
(3).
Tightening torque (M8/10.9x25) ................ M
A
= 9.5 Nm
Tightening torque (M8) .............................. M
A
= 23 Nm
Mount screw plug (4) with new O-ring 13x2.
Tightening torque (M16x1.5)......................
M
A
= 30 Nm
(S) Torque wrench
5870 203 034
(S) Socket wrench TX-40
5873 042 004
Mount compression spring (4), piston (3) and switch (2) with
new O-ring 13x2.
1 = Filter differential pressure valve
2 = Switch with O-ring
3 = Piston
4 = Compression spring
Tightening torque ........................................ M
A
= 30 Nm
Versions without filter differential pressure valve: Mount
screw plug with new O-ring instead of switch (2).
Figure 26
Tightening torque (M16x1.5)....................... M
A
= 30 Nm
Fit adjusting screws (S).
Mount intermediate plate (1) and electro-hydraulic control unit
(2).
(S) Adjusting screws M6
5870 204 063
Figure 27
1
2
3
S
1
2
1
2
3
4
4
1
3
2
Summary of Contents for 65E Turbo Motor Grader
