NorAM 65E Turbo Motor Grader, Service Manual

Page: 169 / 830

ERGOPOWER
Geschäftsbereich
Arbeitsmaschinen-Antriebe
und Achssysteme
22
Installation dimensions of the TCU
Figure-No.: 1.7 B2
1.8 Elektronic Control for ZF-Powershift transmissions:
1.8.1 General:
Because of the different configurations of the electronic transmission controls at the
various vehicles, the corresponding documentation must be taken from the operating
Instructions of the Vehicle Manufacturer or from the Data sheets of the respective
Parts List Versions. In these are also indicated the corresponding circuit diagram
(see Sample Table-10) and the connection diagram (upon request, these Informati-
ons can be asked for at the ZF-Passau).
According to the type of vehicle, the wiring will be performed according to the wi-
ring diagrams. Variations such as double cabin Version (e.g. RT-Crane vehicles) are
possible. The cabin change-over is not scope of supply of the ZF !
The corresponding electric circuit diagrams (proposals) will be realized by ZF.
Upon request, the wiring can be also supplied by ZF.
If the wiring is realized by the Vehicle Manufacturer, it must be in accordance with
the ZF-Requirements (see Installation Specification).
209
50
100
100
Minimum Distance to disengage the plut
ZF-Typ plate