ZF Friedrichshafen AG
description of fault codes for ERGO-Control
97-09-18
TE-AB
F:\15_Kunden_Informationen\FC_Liste\Fc_37_V920.doc
Seite 34 von 58
Fault
Code
(hex)
SPN FMI Int.
Code
(dec)
MEANING OF THE FAULT CODE
possible reason for fault detection
reaction of the TCU
possible steps to repair
remarks
costu
mer
no contact to TCU
•
regulator has an internal defect
TCU shifts to neutral
OP-Mode: TCU shutdown
•
check the regulator resistance
1)
•
check internal wire harness of the
gearbox
8A
5535
4
140
S
.
C
.
TO GROUND AT
DLM
TRANSVERSAL
OUTPUT
TCU detected a wrong voltage at the
output pin, that looks like a s.c. to vehicle
ground
•
cable is defective and is contacted to
vehicle ground
•
device has an internal defect
•
connector pin is contacted to vehicle
ground
output will be on until TCU
power down even if fault
vanishes (loose connection)
OP-Mode: normal
•
check the cable from TCU to the valve
•
check the connectors
•
check the resistance of valve
1)
see chapter 4
all
8B
5535
3
142
S
.
C
.
TO BATTERY VOLTAGE AT
DLM
TRANSVERSAL OUTPUT
TCU detected a wrong voltage at the
output pin, that looks like a s.c. to battery
voltage
•
cable is defective and is contacted to
battery voltage
•
device has an internal defect
•
connector pin is contacted to battery
voltage
no reaction
OP-Mode: normal
•
check the cable from TCU to the valve
•
check the connectors
•
check the resistance of valve
1)
see chapter 4
all
8C
5535
5
141
O
.
C
.
AT
DLM
TRANSVERSAL OUTPUT
TCU detected a wrong voltage at the
output pin, that looks like a o.c. for this
output pin
•
cable is defective and has no
connection to TCU
•
device has an internal defect
•
connector has no connection to TCU
no reaction
OP-Mode: normal
•
check the cable from TCU to the valve
•
check the connectors
•
check the resistance of valve
1)
see chapter 4
all
Summary of Contents for 65E Turbo Motor Grader
