NorAM 65E Turbo Motor Grader, Service Manual

Page: 603 / 830

65E Turbo Motor Grader
Service Manual
8 - 71 Service 2.00_2013.03
Section 8
Hydraulics
Circle Shift Cylinder Removal
The circle shift cylinder uses a ball and socket connection
at each end.
NOTE: The circle side shift cylinder should be extended
a minimum of 76 mm (3 in.) before removal.
Step 1: Disconnect and cap hydraulic hoses, 1.
Step 2: Remove bolts, 2, and washers retaining lower
cylinder socket cap, 3. Remove cap and shims, 4.
Step 3: Using a suitable container to collect fluid, remove
adapter, 5, on barrel end, 6, of cylinder. Compress
cylinder using a prybar until cylinder is free from ball.
Step 4: With the cylinder adequately supported, remove
bolts, 7, and washers retaining socket cap, 8, on barrel
end, 6. Remove cap and shims, 9, and place cylinder
on circle.
Step 5: Clean ball and socket surfaces.
Drawbar
Frame Ball
Saddle
Frame Ball