NorAM 65E Turbo Motor Grader, Service Manual

Page: 302 / 830

R e p a i r M a n u a l
Corporate Division
Off-Road Driveline Technology
and Axle Systems
5871 146 002 11/1
11. REASSEMBLY - PTO
Press ball bearing (1) onto the pump shaft (2) until contact is
obtained.
Figure 1
Mount rectangular ring 50x2 (1).
Grease and centrically align rectangular ring.
Mount pump shaft (2) until contact is obtained.
Figure 2
Fix pump shaft by means of retaining ring 85x3 (1).
Mount O-ring 104x3 (2) onto the flange (3), grease it and bring it
into contact position with the housing rear part.
(S) Set of internal pliers 5870 900 013
Figure 3
Fix flange by means of cylindrical screws (1).
Place O-ring 130x3 (2) into the flange hole and grease it.
Tightening torque (M16/8.8x30)……............... M
A
= 195 Nm
Figure 4
1
2
1
2
1
3
2
1
2