XEN Topaz
NEC Business Solutions Ltd
Features and Specifications Manual
Chapter 4 - 205
D
oc. N
o. 8846 -
Release
2.0
Apr
il 2005
26-05-04 : Cost Centre Code
Cost Centre Code - An optional code to identify the extension making the call for billing.
The cost centre code is specified for each extension by Program 26-07.
If an Authorisation Code is required it is selected from Program 26-06. The
authorisation code is used to identify the customer for billing. You must confirm the
authorisation code with the indirect carrier otherwise all calls via the indirect carrier will
fail.
26-06-01 : Authorisation Code Table
There are 10 entries available each of up to 10 digits in length.
If a Cost Centre Code is required it is set by Program 26-07. The CCC is used to
identify the user for billing. You must confirm the number of digits required by the
indirect carrier.
26-07-01 : Cost Centre Codes
There is an entry for each extension installed on the Topaz system. Each entry can be
up to 6 digits in length.
You must ensure that every extension has a valid cost centre code otherwise calls will
fail from extensions that do not have a valid CCC.
If the customer wants an override code to bypass the LCR routing it is entered using
Program 26-08. For UK operation the override code must begin with a digit 1, refer to
Program 26-01-04 for LCR operation mode.
26-08-01 : Manual Override Access Code Table
There 10 entries each of up to 4 digits in length.
If you have entered any Manual Override codes in Program 26-08 you also have the
option to prevent Emergency calls being made to an indirect carrier that cannot accept
this type of call.
This table is only required if you have entered an override code that will route to an
indirect carrier that cannot accept Emergency calls.
26-09-01 : Manual Override Exemption Table
There are 25 tables each of up to 4 digits in length. There are default entries of 000 for
Australian operation.
Change to DTMF Operation
In Program 26-05-02 the @ symbol will have different operation for Analogue trunks or
ISDN trunks.
Analogue Trunks
At the point in the dialled digits where the @ appears the Topaz will revert to DTMF
dialling. This is only required when the analogue trunk is set the Loop Disconnect
dialling in Program 14-02-01.