![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_features-and-specifications-manual_248490114.webp)
Chapter 4 - 106
Features
NEC Business Solutions Ltd
XEN Topaz
Doc. No. 8
846 - Re
lease 2.0
April 2005
With Automatic Handsfree, an extension user can press a line key to place a trunk
call without first lifting the handset or pressing SPK. Users without Automatic
Handsfree can preselect a line key before lifting the handset or pressing SPK.
•
Long Conversation Cutoff/Warning Tone for Long Conversation
Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a
set time period. Using the Warning Tone for Long Conversation feature allows
users on outgoing calls to hear a warning tone prior to the call disconnecting.
•
Loop Keys
Loop keys simplify placing Central Office Calls.
•
Microphone Mute
In order to mute the handset transmitter, set up a Microphone Mute Programma-
ble Function Key. The MIC key will only mute the Handsfree microphone.
•
Programmable Function Keys
Line keys and loop keys simplify placing outside calls.
•
Trunk Group Routing
Trunk Group Routing sets outbound call routing options for users that dial the
Trunk Group Routing code (0) for trunk calls.
•
Trunk Groups
Use trunk group programming to set the order in which users access trunks within
a specific trunk group.
• Operation
To place a call over a trunk group:
1. At system phone, press a SPK key.
OR
At single line set, lift handset.
2. 2. Dial 804.
3. 3. Dial line group number (01-25).
4. 4. Dial number.
OR
1. At system phone, press trunk group key (PGM 15-07 or SC 851: *02 + group).
Also see the “Loop Keys” feature.
2. Dial number.
To place a call using Trunk Group Routing:
1. 1. At system phone, press a SPK key.
OR
At single line set, lift handset.
2. Dial 0.
If your system has an Alternate Trunk Route Access code, you may dial that instead.
3. Dial number.
OR
1. At system phone, press Trunk Group Routing key (PGM 15-07 or SC 852: *05).
Also see the “Loop Keys” feature.
2. Dial number.