XEN Topaz
NEC Business Solutions Ltd
Features and Specifications Manual
Chapter 4 - 201
D
oc. N
o. 8846 -
Release
2.0
Apr
il 2005
Last Number Redial
• Description
Last Number Redial allows an extension user to quickly redial the last number Dialled.
For example, a user may quickly recall a busy or unanswered number without manually
Dialling the digits.
Last Number Redial saves in system memory the last 36 digits a user dials. The
number can be any combination of digits 0-9, # and *. The system remembers the
digits regardless of whether the call was answered, unanswered or busy. The system
normally uses the same trunk group as for the initial call. However, the extension user
can pre-select a specific trunk if desired.
Redial List
The system allows display telephones to have a Redial List. Up to 10 Dialled numbers
(both external and internal destinations) are automatically stored in the Redial List. The
user can display and select one of the stored numbers and then redial it. If more than
10 destination numbers are Dialled, the oldest number is automatically erased to make
room for the new number.
Conditions
Redial List requires the use of a display telephone. Non-display and single line phones
can not use this feature.
Default Setting
Enabled.
• Programming
11-12-12: Service Code Setup (for Service Access) - Last Number Dial
Assign a service code (816) to use Last Number Dial.
11-12-17: Service Code Setup (for Service Access) - Clear Last Number Dial-
ling Data
Assign a service code (876) to clear the Last Number Dial.
15-02-13: System Telephone Basic Data Setup - Redial List Mode
Select the type of numbers that will be stored in the Redial List - Internal
and External numbers (0) or External only (1).
20-06-01: Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
• Related Features
•
Automatic Route Selection
When using Automatic Route Selection, ARS selects the trunk for the call unless
the user preselects.
•
Repeat Redial
The system can periodically redial an unanswered trunk call.
•
Save
A user can save the number of an outgoing call to be accessed at a later time.