NEC Xen Topaz Features And Specifications Manual Download Page 356

Page: 356 / 390

Chapter 4 - 348

Features

NEC Business Solutions Ltd

XEN Topaz

Doc. No. 8

846 - Re

lease 2.0

April 2005

Single Line Telephone

1. Press

SPK

key or lift handset.

2. Dial

884

(default).

3. Enter mailbox number (and password).

4. Dial service code

5. Dial abbreviated broadcast list number (0-9).

6. Record Message.

7. Hang up.

Transferring a Message to a Broadcast List:

1. After the message playback has ended,

2. Dial

28#

3. Dial abbreviated broadcast list number (0-9).

4. Dial

5. Dial

to accept.

6. Hang up.

Voice Mail Access from Outside Line:

1. Dial in to listen to your personal greeting.

2. After your greeting has ended, two short beeps will be heard.

3. Enter your password (if set).

4. Dial

5. You now have access to the service code options for your mailbox,

(e.g. dial

to listen to your messages).

Note:

Mailbox password must be set before external access is allowed

Personal Answering Machine Emulation

(External Voice Mail Integration Only - Not available with DSPDB Voice Mail)

System Phone

1. Press the Personal Answering Machine Emulation key (SC 851:16).

2. Dial

to Set, or

to Cancel.

3. Dial Call Forwarding type:

= All calls

= Outside calls only

= Intercom calls only

4. Press

SPK

to hang up.

Single Line Telephone

1. Press

SPK

key or lift handset.

2. Dial

888

(Call Forward to Station).

3. Dial

to Set, or

to Cancel.

4. Dial Call Forwarding type:

= All calls

= Outside calls only

Summary of Contents for Xen Topaz







































































































































































































































































































































































































Search results

Summary of Contents for Xen Topaz

Reviews:

Related manuals for Xen Topaz

Brands by name

Popular brands

NEC Xen Topaz, Features And Specifications Manual

Search results

Summary of Contents for Xen Topaz

Reviews:

Related manuals for Xen Topaz

Brands by name

Popular brands