XEN Topaz
NEC Business Solutions Ltd
Features and Specifications Manual
Chapter 4 - 309
D
oc. N
o. 8846 -
Release
2.0
Apr
il 2005
20-13-08: Class of Service Options (Supplementary Service) – Conference
In an extension’s Class of Service, enable (1) or disable (0) the exten-
sion’s ability to initiate a Conference.
20-13-10: Class of Service Options (Supplementary Service) - Barge In Mode
In an extension’s Class of Service, set whether an extension should be
able to Barge In to a call and talk (1) or just monitor the call (0).
20-11-14: Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk
Transfer
Disable (0) the Trunk-to-Trunk Transfer Restriction option.
24-02-07: Forced release for Trunk-to-Trunk Transfer
Specify the maximum length of time a trunk-to-trunk transfer (tandem
transfer) can be in progress before it is forcibly disconnected (default=30
minutes).
• Related Features
•
Central Office Calls, Answering / Central Office Calls, Placing
Other programmed options for incoming and outgoing calls can affect how calls
are handled. Check or program these options as needed.
•
Conference, Voice Call
Set up a Conference with a co-worker in your immediate work area.
•
Meet Me Conference
Meet Me Conference lets an extension user set up a Conference via Paging.
•
Meet Me Paging
Meet Me Paging lets an extension user set up a two-party meeting via Paging.
• Operation
Method A - Tandem Trunking from Conference
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press CONF key.
3. Place or answer second trunk call.
4. To add more calls to the tandem call, repeat from Step 2. or to set up the tandem call,
press CONF key twice.
This sets up a Conference between you and both outside parties.
5. Press Transfer key (PGM 15-07 or SC 851: 06).
To end the Tandem Call:
1. Press either flashing line key.
The line keys light steadily (green). You can listen (i.e., monitor) to the call or rejoin the conversation, based
on the setting in Program 20-13-10.
2. Press SPK or Hang up.
If Program 20-13-10 is set to “0”, the Conference ends and the line keys go out.
If Program 20-13-10 is set to “1”, to disconnect the Conference, you must use Forced
Trunk Disconnect (i.e., Press the line key + 724).
Method B - Tandem Trunking on Hang up