Chapter 4 - 204
Features
NEC Business Solutions Ltd
XEN Topaz
Doc. No. 8
846 - Re
lease 2.0
April 2005
26-01-04 : LCR Mode Option
Set to UK operation - numbers beginning with digit 1 will use Program 26-08-01 for
manual override operation.
Set to Not UK operation - numbers beginning with digit 1 will use Program 26-02-01 i.e.
not use manual override operation. Use this setting for typical Australian applications.
Outgoing calls via an LCR enabled trunk will check each dialled digit against the entries
of Program 26-02-01.
If the digits dialled do not match an entry the call will use the default carrier set by 26-05
Carrier table 1.
26-02-01 : Digit analyse Table
Enter the dialling code (normally just the STD code e.g. 01509), do not enter any trunk
access digits (e.g. 901509).
There are 200 entries available, each entry can have up to 16 digits.
A wildcard can be entered. A wildcard means any dialled digit. Enter @ for a wildcard
(press function key 01 during KeyTel Programming for a wildcard)
For each entry you must specify the carrier table to use by Program 26-02-06, the
carrier table is 1-25 and is set by Program 26-05.
26-02-06 : LCR Carrier Table
Enter the carrier table to use.
Note.
There are no settings required in Program 26-02-02, 26-02-03, 26-02-04, 26-02-05, 26-
03 & 26-04. These are used by ARS operation. Therefore you must ensure that ARS is
disabled in Program 26-01-01 otherwise Program 26-02-02, 26-02-03, 26-02-04, 26-
02-05, 26-03 & 26-04 will be enabled.
In the LCR carrier table you can specify:
26-05-01 : Delete Digits
Delete leading digits - This is used to delete an override code dialled by the user.
Specify the quantity of leading digits to be deleted.
26-05-02 : Access Code
Access Code - The access code of the indirect carrier. This is specified by the indirect
carrier.
The access code can be up to 16 digits in length, it is possible to enter Pause (P) and
Change to DTMF (@). A pause is entered with function key 01 and change to DTMF
with function key 02 during KeyTel programming. Refer to Change to DTMF Operation
for further details.
26-05-03 : Authorisation table number
Authorisation code table - An optional PIN code. There are 10 entries available, they
are specified in Program 26-06.