![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_features-and-specifications-manual_248490328.webp)
Chapter 4 - 320
Features
NEC Business Solutions Ltd
XEN Topaz
Doc. No. 8
846 - Re
lease 2.0
April 2005
Toll Restriction Override
• Description
Toll Restriction Override lets a user temporarily bypass an extension’s Toll Restriction.
This helps a user that must place an important call that Toll Restriction normally
prevents. For example, you could set up Toll Restriction to block 0011 calls and then
provide a Toll Restriction Override code to your attendant and executives. When the
attendant or executive needs to place a 0011 call, they just:
•
Press CALL and dial their override code.
•
Press a line key or dial a trunk access code (e.g., 0 or 805 002).
•
Place the 0011 call without restriction.
You can assign a different Toll Restriction Override code to each extension. Or,
extensions can share the same override code.
Conditions
None
Default Setting
Disabled.
• Programming
11-11-36: Service Code Setup (for Setup/Entry Operation) - Walking Toll
Restriction
Assign a service code ( 163 763) for Toll Restriction Override.
20-08-06: Class of Service Options (Outgoing Call Service) - Toll Restriction
Override
In an extension’s Class of Service, enable (1) or disable (0) the ability to
use Toll Restriction Override.
21-01-07: System Options for Outgoing Calls - Toll Restriction Override Time
Set the Toll Restriction Override Time (0-64800 seconds). After dialling
the Toll Restriction Override codes, the system removes Toll Restriction
for this interval.
21-14-01: Walking Toll Restriction Password Setup - User ID
Enter the Toll Restriction Override User ID codes (6 digits) into tables.
Up to 500 different override codes can be entered.
21-14-02: Walking Toll Restriction Password Setup - Walking Toll Restriction
Class Number
Enter the Walking Toll Restriction Class of Service (1-15) to be used for
each table number assigned in 21-14-01.
35-02-06 through 35-02-11 : SMDR Output Options
Assign the output condition for the printer or PC. If the data is set to “1”
(output), the symbol of the call will print as “POTW” and the password
table number will be printed as “W/ @@@” (@@ equals the 3 digit table
number) in the Account Code area.
• Related Features