![background image](http://html1.mh-extra.com/html/nec/univerge-sv9100/univerge-sv9100_system-hardware-manual_3943845496.webp)
Issue 2.0
7-20
Installing SV9100 Optional Equipment
11-08-01 : ACI Group Pilot Number
Assign pilot numbers to ACI groups. When a user dials the pilot number,
they reach an available ACI software port in the group.
ACI Groups 1
~
16
11-12-50 : Service Code Setup (For Service Access)
Specify the service code to toggle the relay open and closed (Default: 780).
33-01-01 : ACI Port Type Setup
Set each ACI software port for input (1) or input/output (2). Use input ports
for Music on Hold sources. Use output ports for External Paging/ringer
control.
ACI Ports 1
~
96
33-02-01 : ACI Department Calling Group
Assign ACI software ports to ACI Department Groups. This lets ACI callers
connect to ACI software ports by dialing the group pilot number (set in
Program 11-08).
ACI Ports 1
~
8, ACI Groups 1-16
ACI Recording
14-09-01 : ACI Conversation Recording Destination for
Trunks –
ACI Recording Destination Extension Number
Use this option to assign the ACI Call Recording destination per trunk. The
destination can be an ACI port extension number (assigned in Program
11-06-01) or an ACI Department Group pilot number (assigned in Program
11-08-01). If destinations are assigned in Programs 14-09 and 15-12, the
destination in Program 15-12 is followed.
14-09-02 : ACI Conversation Recording Destination for Trunks –
ACI Automatic Recording for Incoming Call
Determine whether a trunk should be automatically recorded when an
incoming call is received (0=Off, 1=On).
15-07 : Programmable Function Keys
If required, program an ACI Conversation Record Key (SC 751 + 78). This
key allows an extension user to press the key to manually record a call to
the ACI.
15-12-01 : Conversation Recording Destination for Extensions –
ACI Recording Destination Extension Number
Assign the ACI Call Recording destination per extension. The destination
can be an ACI port extension number (assigned in Program 11-06) or an
ACI Department Group pilot number (assigned in Program 11-08). If
destinations are assigned in Programs 14-09 and 15-12, the destination in
Program 15-12 is followed.
15-12-02 : Conversation Recording Destination for Extensions –
ACI Automatic Recording for Incoming Call
Determine whether an extension should be automatically recorded when
an incoming call is received (0=Off, 1=On).
Summary of Contents for Univerge SV9100
