NEC Univerge SV9100, System Hardware Manual

Page: 409 / 556

Issue 2.0
SV9100 System Hardware Manual 5-67
4.8.3 Configuring the Digital Telephone for the Ten Key Kit
1. With the telephone not plugged in and the handset on-hook, press the
4
and
6
buttons on the numbered keypad and connect the telephone
cable.

This places the telephone into Service Class Read/Write (R/W)
mode. The Message Waiting LED should be On.
2. Press
2
on the numbered keypad to enter the Button Kit mode.
 The Message Waiting LED should flash.
3. Follow the directions below for the type of keypad installed:
4. Press line key 2, 8, 14 or 20 to save to memory. The display changes
back to the Service Class R/W mode and the Red Message Waiting
(MW) LED is On.
5. Press
Exit
to return the telephone to idle.
Table 5-15 Numbered Keypad Type
Numbered Keypad Type Push
LED Indication
(2D Style Terminal)
Japan Value 01 Line 1 LED on Red
Model A Telephone 02 Line 2 LED on Red
Model B UX5000 Telephone 03 Line 1 and 2 LED on Red
Call Center 04 Line 1 LED on Green
Hotel-1 05 Line 2 LED on Green
Hotel-2 06 Line 1 and 2 LED on Green
Retirement Home 07 Line 1 LED flashing Red
Japan 32-Button 08 Line 2 LED flashing Red
Japan Economy 09 Line 1 and 2 LED flashing Red
Model A Economy 10 Line 1 LED flashing Green
Model B Economy 11 Line 2 LED flashing Green
Reserve 12 Line 1 and 2 LED flashing Green