NEC Univerge SV9100, System Hardware Manual

Page: 103 / 556

Issue 2.0
SV9100 System Hardware Manual 2-31
S
ECTION
6 S
YSTEM
R
EQUIREMENTS AND
S
PECIFICATIONS
6.1 Cabling
This section provides cabling requirements and specifications for various
equipment used in the SV9100 system.
Figure 2-3 Connecting the DLC Using Twisted 2-Pair Cable is a diagram of the
chassis connected with each of the multiline terminals and single line telephones
by a separate twisted 1-pair cable or 2-pair cable (only for multiline terminals).
Refer to the following tables for cabling requirements and specifications.

Table 2-15 DT400/DT300 Series Loop Resistance and Cable Length on
page 2-27

Table 2-16 DT800/DT700 Series Loop Resistance and Cable Length on
page 2-28

Table 2-17 Cable Connection Between Analog Port and Single Line
Equipment on page 2-28

Table 2-18 Cabling Requirements on page 2-29
Figure 2-3 Connecting the DLC Using Twisted 2-Pair Cable
Table 2-16 DT400/DT300 Series Loop Resistance and Cable Length
Terminal or Adapter
By Twisted 1-Pair Cable
(without AC Adapter)
24 AWG
DTZ-2E-3 ( ) TEL
DTL-2E-1 ( ) TEL
1,969 ft (600m)
DTZ-6DE-3 ( ) TEL
DTL-6DE-1 ( ) TEL
1,969 ft (600m)
DTZ-8LD-3 ( ) TEL
DTL-8LD-1 ( ) TEL
1,969 ft (600m)
DTL-12BT-1 ( ) TEL
1,969 ft (600m)
DTL-12PA-1 ( ) TEL
1,969 ft (600m)
DTZ-12D-3 ( ) TEL
DTL-12D-1 ( ) TEL
1,969 ft (600m)
Multiline Terminal
Twisted 2-Pair Cable
DLC
RJ-11