NEC Univerge SV9100, System Hardware Manual

Page: 526 / 556

Issue 2.0
7-50 Installing SV9100 Optional Equipment
3. Lower the tilt leg to the first position (refer to Figure 7-50 Separate Tilt
Leg from Leg Support ).
4. Push the two stopper tabs through the slots to separate the tilt leg
from the leg support.
5. Lay the tilt leg and the leg support flat.
6. Press the two tabs locking the legs to the multiline terminal and pull
the legs toward you, lifting to remove (refer to
Figure 7-51 Remove
Legs From Multiline Terminal ).
Figure 7-50 Separate Tilt Leg from Leg Support
Stoppers
Tilt Leg
Figure 7-51 Remove Legs From Multiline Terminal