NEC Univerge SV9100, System Hardware Manual

Page: 478 / 556

Issue 2.0
7-2 Installing SV9100 Optional Equipment
The PGDAD connects to any available digital extension port. The terminal
connections made in the PGDAD and the jumper settings determine what
features are used for each circuit.
2.2 LED Indications
Table 7-1 PGDAD LED Indications lists the LED indications and provides a brief
description of each.
2.3 Setting up PGDAD Connections
This sections provides instructions for setting up the PGDAD connections.
Figure 7-1 PGDAD
Channel 2
Status LED
Channel 1
Status LED
Table 7-1 PGDAD LED Indications
LED Indication Note
LED 1 Green LED when
CH1 in use. Flashing green LED indicates DIP Switch setting
and programming for CH1 are conflicting.
LED 2 Green LED when
CH2 in use. Flashing green LED indicates DIP Switch setting
and programming for CH2 are conflicting.
CAUTION
❍ If the PGDAD is to be wall mounted, all the cable connections should
be made first.
❍ For the module to ID correctly after setting the jumpers, set the circuit
type to 0 for the module port in Program 10-03-01 prior to connecting
the line cord to the PGDAD.