NEC Univerge SV9100, System Hardware Manual

Page: 423 / 556

Issue 2.0
SV9100 System Hardware Manual 5-81

Supports Red and Green LED colors
5.2.1.1 Installing the 8LK-L UNIT
1. Remove both plastic panels from the front of the multiline
terminal.
2. Turn multiline terminal upside down.
 Only one 8LK-L UNIT can be attached to the DT Series
multiline terminal.
3. Pry the side panel from the multiline terminal.
4. Return the multiline terminal to the buttons side up position.
5. Fit the projections on the side of the 8LK-L UNIT into the
guide holes on the side of the multiline terminal.
Figure 5-80 8LK-L UNIT
WARNING
To prevent possible damage to the 8LK-L UNIT
or the DT Series multiline terminal during
installation or removal, disconnect the line
cord/LAN cable and the AC/DC adapter from the
DT Series multiline terminal.
Figure 5-81 Remove Side Panel from Multiline Terminal
Side Panel