NEC Univerge SV9100, System Hardware Manual

Page: 78 / 556

Issue 2.0
2-6 SV9100 System Specifications
Analog Trunks (COT)
16 40 88 136 184
Total 400
BRI
16 40 88 136 184
PRI (2M)
60 90 180 270 360
IP Trunk (SIP)
400
DTMF Receivers
80 144 144 144 144
*2
VoIP Channels
256 256
Voice Mail Channels on CPU
16 channels 16
Modem
1 channel 1

1 = For

-law countries 104 timeslots per chassis are assigned the G.711 PCM communications (e.g., voice
communications) and 7 timeslots per chassis are assigned for the Data communications (e.g., HDLC over ISDN). Thus
the simultaneous data communications are limited up to seven per chassis.

2 = An additional 64 DTMF Receivers are available when the GPZ-BS10 is installed.

An additional 64 DTMF Receivers are available when the GPZ-BS10 is installed.
If using Caller ID to analog trunks and DSP resources are set to common, DSP resources will only be used for analog
trunks and not analog stations.
Table 2-2 SV9100 9.5” Gateway and 19” Maximum System Capacities – Trunks/Ports/Channels (Continued)
Number of:
9.5”
Chassis
19” Chassis
System
Maximum
x 1
(CPU + 2
Slots)
x 1
(6 Slots)
x 2
(12 Slots)
x 3
(18 Slots)
X4
(24 Slots)