NEC Univerge SV9100, System Hardware Manual

Page: 48 / 556

Issue 2.0
R-6
SAFETY INFORMATION
This equipment has been certified by Canadian Standards Association and found to comply with all
applicable requirements:

CAN/CSA C22.2 No. 0-M – General Requirements – Canadian Electrical Code, Part II

CAN/CSA C22.2 No. 60950-1-07 – Safety of Information Technology Equipment – Part l: General
Requirements

UL 60950-1-SAFETY, 2nd Edition – Safety of Information Technology Equipment – Part I: General
Requirements
INDUSTRY CANADA REQUIREMENTS
Industry Canada has established rules that permit this telephone system to be directly connected to the
telephone network. Prior to the connection or disconnection of this telephone system to or from the
telephone network, the telephone company must be provided with the following information.
This product meets the applicable Industry Canada Technical Specifications/Le present material est
conforme aux specifications techniques applicables d’industrie Canada.
1. Your telephone number.
2. IC registration number: IC: 140L-SN1750
3. Ringer Equivalence Number (REN) of the equipment:
0.7
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines and internal metallic water pipe system, when present, are connected together. This
precaution may be particularly important in rural areas.